ULTRASHIELD™ 
An
overlaminating station which applies a tough, 1 mil (0.0254mm) thick
polyester overlaminate film for CR80 cards
- provides
complete user control of lamination temperature to suit different
film and card stock
- extends
card life to at least 40,000 swipes
- attaches
easily to the front of most MAGICARD printers and laminates the
first card while the second card is being printed
- optional
card input hopper for stand alone operation
| Specifications |
|
|
Printer
Compatibility
|
All new build Magicard printers. Compatibility can be achieved with most older models by fitting a new EPROM and changing a cable |
|
Stand
Alone Operation
|
The UltraShield laminator can be used alone to laminate PVC CR80 cards either on a hand-fed basis or by fitting the optional card reader (Cards must not have the 'O' panel overcoat applied) |
|
Cycle
Time
|
UltraShield will laminate a card in about 35 seconds and will operate concurrently with a Magicard print cycle |
|
Overlay
Durability
|
Expected to survive at least 40,000 passes through a magstripe reader |
|
Card
Life
|
Expected to be 5-10 years in driving license and similar applications when PVC/PET laminated cards |
|
Tamper
Resistance
|
Overlaminate is virtually impossible to remove without destruction of the card when laminated at the correct temperature |
|
Security
Features
|
Overlaminate films containing an optical security logo or hologram are available and custom logos are available to special order |
|
Card
Thickness
|
Overlaminate can be applied to cards from 30 mil to 60 mil (0.76mm to 1.6mm) thickness |
|
Overlaminate
Dimensions
|
Approximately 3.25" x 2.0" x 1 mil (82.5mm x 51.0mm x 0.025mm) |
|
Stacker
Capacity
|
The output stacker will accept up to 100 cards of standard 31 mil (0.79mm) thickness |
|
Interface
|
The UltraShield laminator connects to the dedicated UltraSecureTM serial port on the rear of Magicard printers for synchronisation |